Cast stone humidifier mixing tube through which both sides of the support frame is fixed on the base, feed motor fixed to the side of the hopper, into the cylinder is located to the lower part of the hopper, into the barrel and the mixing tube axis and with each other communication, the master at the mixing tube and into the cylinder, the main motor drives the rotation of the spindle, which is in the input and surrounding the spindle on the spindle is fixed to the barrel auger web, on stirring a uniform barrel fixedly provided with a stirring spindle stick, stir evenly on the drum set up a row of intakes, intake and intake pipe connected to the upper end of the mixing tube is also fixed a vibration motor, to avoid the humidification uneven mixing, less prone to fly ash bonding, safe and reliable . Prepare cast stone humidifier before the operation: (1) the operator must be an operating license before operating. (2) must be checked before the operation gray tank without foreign body, must start no-load condition; you must check whether the lack of oil in the gearbox before 3) operation, other parts are lubricated properly. Sequence of operations: (1) transport gray car positioning, the cast stone humidifier is turned on, and the sprayed water pipes open. (2) Turn on automatic unloader cinder. (3) When the ship is almost full gray car, turn off the automatic under the feeder; when the hopper is full, close the cast stone and spray humidifier water pipes closed. For more information about our products, please call 18032703752 Feedback and Machinery Manufacturing Co., Ltd. Changzhou Yingjie.